top of page

Frame Materials 101: Zyl, Nylon, Optyl and the Metals

Writer: Durhl Davis
Durhl Davis
2 days ago
5 min read

Updated: 1 day ago


By Durhl Davis, ABO-certified optician, Candor Wholesale Optical Laboratory


Patients pick frames by how they look. Opticians should also know what they're made of, because the material decides how the frame adjusts, how long it holds up, whether it causes a skin reaction, and which patients it's right for.


Here's what each common material brings to the counter, plus a few you may never have handled.


Plastics


Zyl (cellulose acetate)


The classic plastic frame, made from plant cellulose with plasticizers.

  • Benefits: takes a high polish and comes in almost any color, pattern or layered look. Adjusts well with heat.

  • Drawbacks: over time, sweat, skin oils and sunlight draw the plasticizers out. The frame dries out, turns brittle and can leave a whitish film. It can also warp if it's left in a hot car.

  • Adjusting: warm it, shape it, then cool it to set the adjustment.

  • Best for: fashion-minded patients who want color and style.


Cellulose propionate


A close cousin of zyl, injection-molded.

  • Benefits: lighter, thinner and harder-surfaced than zyl, and usually less expensive.

  • Drawbacks: very heat-sensitive. Too much heat can make it shrink, bubble or stretch, so use a lower setting than you would for zyl.


Nylon and polyamide (including Grilamid)


Tough, flexible synthetic plastics.

  • Benefits: very durable and impact-resistant, and they hold up to sweat and most solvents. A go-to for sports, safety and children's frames.

  • Drawbacks: limited colors, because nylon doesn't dye or paint easily. It has strong elastic memory, so it tends to spring back toward its molded shape.

  • Adjusting: adjust with care, and don't expect big changes to hold.

  • Best for: kids, athletes and anyone hard on their glasses.


Optyl


A patented epoxy resin with "thermo-elastic memory."

  • Benefits: lighter than zyl, contains no plasticizers, keeps its finish, and is considered hypoallergenic.

  • Drawbacks: it can't be adjusted cold. Bend it without enough heat and it will snap.

  • Adjusting: it needs more heat than zyl before it turns soft and rubbery. It holds the new shape once it cools, but reheat it and it goes back to its factory shape. That's handy when you need to undo an adjustment. It's also a surprise if you forget about it while warming the frame to insert a lens.

  • Best for: patients who want a lightweight plastic and who react to other materials.


Carbon fiber


Carbon strands set in resin.

  • Benefits: very strong, thin and light, and it doesn't stretch, warp or break down.

  • Drawbacks: it can't be adjusted with heat or cold. Manufacturers often put metal cores in the temples so the temple tips can be bent.

Candor Optical
Eyeglasses come in a varity of shapes, colors and materials

Metals


Monel


A nickel-copper alloy and one of the most common metals in eyewear.

  • Benefits: strong, affordable, easy to solder and easy to adjust.

  • Drawbacks: heavier than other metals, and it's mostly nickel. Once the plating wears through, it's a frequent cause of skin reactions such as redness, itching or a green mark on the skin.

  • Best for: budget-friendly metal frames for patients without a nickel sensitivity.


Nickel silver (German silver)


Despite the name, there's no silver in it. It's mostly copper, with nickel and zinc.

  • Benefits: tough and elastic, so it springs back after a knock. Often used for temples and bridges on combination frames.

  • Drawbacks: the nickel content, and the nickel plating often applied over it, make it a common allergy trigger. Plating only partly protects the skin.


Stainless steel


An iron-chromium alloy.

  • Benefits: strong, thin, lightweight, corrosion-resistant and springy. It holds adjustments well, and it's relatively hypoallergenic, especially versions labeled nickel-free.

  • Drawbacks: hard to solder, so repairs are limited.


Titanium


A pure metal, and the premium choice.

  • Benefits: very light, very strong, highly resistant to corrosion from sweat and salt air, and hypoallergenic. It's the first choice for patients with metal allergies.

  • Drawbacks: costs more, and it's difficult to solder.


Beta titanium


Titanium alloyed with other metals.

  • Benefits: keeps most of titanium's strength and light weight, with more flexibility. It's springy and easier to fine-tune than pure titanium.

  • Note: "titanium" on a frame doesn't always mean pure titanium. For a patient with a severe allergy, confirm the frame is pure titanium.


Memory metal (such as Flexon)


Usually a nickel-titanium alloy.

  • Benefits: can be bent, twisted or sat on and spring right back to its original shape. Nearly indestructible in normal wear.

  • Drawbacks: the same memory makes custom fitting difficult. Pantoscopic tilt, temple bends and other fine adjustments tend to spring back. It also contains nickel, so ask about allergies first.

  • Best for: patients who are rough on glasses, and kids.


Aluminum


  • Benefits: very light and corrosion-resistant, with a clean, modern look.

  • Drawbacks: softer than other metals, so it can bend more easily, and it's not easy to solder.


Beryllium (copper-beryllium)


  • Benefits: light, strong, flexible and corrosion-resistant, with a high polish. Often found in budget metal frames.

  • Drawbacks: a small number of people are allergic to it.


Gold-filled (rolled gold)


A layer of karat gold bonded onto a base-metal core. The gold content is stamped on the frame as a fraction or in parts per thousand.

  • Benefits: a far thicker gold layer than plating, with good corrosion resistance and a classic look.

  • Drawbacks: some wearers still react with constant skin contact. Don't confuse it with gold-plated frames, where a thin plating wears through, first showing as fading where the temples touch the head.


Natural materials


Wood


Usually handmade, often one of a kind, and back in fashion thanks to better stabilizing methods.

  • Benefits: lightweight, with a look nothing else matches.

  • Drawbacks: stiffer and harder to adjust than plastic, and usually more expensive. Follow the maker's care instructions.


Buffalo horn


Natural horn, typically handmade.

  • Benefits: lightweight and elegant, and it warms to body temperature against the skin.

  • Drawbacks: expensive and limited in adjustment. Every piece is different, so handle it with care and follow the maker's guidance.


A bit of history: today's "tortoise" frames are a color pattern on plastic. Genuine tortoiseshell, like ivory, falls under international wildlife trade restrictions (CITES), so you won't see it in modern frames.


Quick match: material to patient


  • Metal allergy: pure titanium, or a hypoallergenic plastic such as Optyl or nylon

  • Kids and sports: nylon or Grilamid, or memory metal

  • Rough on glasses: memory metal or nylon

  • Wants color and style: zyl

  • Wants the lightest frame: titanium, Optyl or carbon fiber

  • Needs a precise custom fit: zyl, monel or stainless. Avoid memory metal

  • Budget: monel or propionate

  • Wants something nobody else has: wood or buffalo horn


Why it matters at the lab


Material also affects how a job is finished. Zyl and Optyl need heat to insert lenses, and Optyl's memory means it won't stay stretched. Memory metal and nylon are less forgiving if a lens is cut even slightly large. Natural materials get extra care on the bench.


Every frame that comes through Candor gets a standard alignment before it goes back to you, since frames get handled a lot along the way. If you'd rather we leave a frame exactly as it came in, just note it on the order. We don't replace parts like nose pads or screws unless you ask. If a patient has a known metal allergy, note that too, so it's on the ticket.


Questions about a job? Call Durhl at (318) 542-2550 or email info@candoroptical.com. New to Candor? Open a wholesale account and we will follow up within 2–3 business days.

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page